Features:

• Data logging via PC interface (optional accessory included with program card)

• Firmware upgradable via PC interface

• High SBEC current output: 8A continuous, 16A burst

• Adjustable SBEC voltage up to 8.4v for optimum performance from HV servos

• Extremely low internal resistance 

• Smooth and accurate throttle linearity 

• Power arming protection, over-heat protection, low-voltage protection and lost signal protection

• Supports high RPM motors

• Advanced governor mode and soft start

• Optional programming card & PC USB interface available

Specifications:

• Output: 155A continuous, 200A burst for 10 seconds

• Input voltage: 2-6s LiPo; 5-18 cell Ni-XX

• SBEC output: 5.0v / 6.0v / 7.4v / 8.4v adjustable @ 8A (switching)

• Weight: 130g

• Dimensions: 65 x 46 x 16.6mm

Programmable Options:

• Brake setting (off / soft / mid / hard -- default: off)

• Battery type: (Ni-XX / LiPo / LiFe -- default: LiPo auto detect)

• Cut-off voltage threshold (2.8V 50% / 3.0V 60% / 3.2V 65% / No protection -- default: 3.0V 60%)

• Factory default setup reset

• Timing settings (auto / 2° / 8° / 15° / 22° / 30° -- default: auto)

• SBEC Voltage Output (5.0v / 6.0v / 7.4v / 8.4v -- default: 5.0v)

• Governor mode: (RPM off / 1st Soft Start / 2nd Soft Start / Gov Mode 1 / Gov Mode 2 -- default: RPM off)

• Motor rotation: (forward / reverse -- default: forward)

• Start up (Low / Mid / High-- default: 30%)

• LVC cut-off type: (reduce gradually / cut-off -- default: reduce gradually)